Zeroed the body force on the dependent nodes of rbe3 constraints.

Fixed shell element stress mapping by *INITIAL_STRESS_SHELL.

Fixed fabric material form 14 to use the unload curve for the b-fiber when defined instead of the load curve.  This bug was introduced in R2 revision 789.

Made sense switch not case sensitive in d3kil file

Modified beam spot weld type 9 failure.  Now, the moment used in the failure
calculation will be assumed to be zero if the axial weld stress is compressive.

Fixed the rate affects in type 9 beam spot weld failure.

Fixed MPP bug related to initialization of tied interfaces: ALL interfaces
were being treated as constrained when checking for nodes involved
in more than one tied interface, causing some nodes to be incorrectly
deleted from penalty based tied interfaces

Fixed stress initialization for tetrahedral elements of element formulation 4.

Fixed a memory error with material type 3 in implicit analysis.

Fixed possible divide by zero error in beam spot weld failure type 5.

Fixed mass scaling message for spot welds.

Fixed a bug in consistently assembling the force array for efg shell 42.

Added user defined through-thickness integration rules to efg shells.

Fixed contact with material 106 so that parts don't penetrate.

Fixed the energy ratio calculation with mass scaling.

Fixed input of material 138.

Modified MPP drawbead contact to better match SMP

Fixed dbout output of jntforc converting data from global to the local 
coordinate system.

Improved truncation error in EFG shell stability analysis.

Enabled *TERMINATION_DELETED_SHELLS option.

Fixed 3D remeshing in the MPP version.

Fixed initial stress resultant for material 116.

Fixed d3hsp output format for belt materials and
belt slip rings so they work for large numbers.

Fixed d3dump write error for MPP solid adaptive

Stopped triangle sorting for efg shells in implicit analysis.

Fixed treatment of displacement convergence tolerance for implicit
analysis upon restart.

Fixed a bug in *DATABASE_SPH if *DATABASE_HISTORY_NODE is not defined.

Fixed a bug in efg shells when element failure happens.

Fixed bug for ANSYS database output.